Below you'll find the details and setup information for Flight Simulator
and Teamspeak for joining our ATC Sessions.
FLIGHT SIMULATOR SETUP
your Player Name - Your
player name should be the same as your call sign that you joined
the website with. Use of any other call sign, spelling, or variation
will not allow your pilot account to be credited for your flight
time. Please check that your player name is correct.
IP Address -
Enter the IP address for the ATC Server: 220.127.116.11 Use
the "Search" button if nothing appears in the Sessions
screen after a few seconds.
Verify Your Client Settings -
Click the "Client Settings..." button on this screen to verify
that you're using the correct Port Number. The ATC Sessions use
the Default Port: 23456
Click OK on the Client Settings screen after verifying the
Port. You should now be back to the Multiplayer Window. Choose
session you want to join from the list and Click "Join"
ADDITIONAL INFORMATION - Our ATC Sessions use a standard
protocol to run smoothly. All Members should be aware and practice
these guidelines. :: JOINING ::
information can be found here. :: PROTOCOL ::
IP ADDRESS -
The IP address for our ATC Sessions is different than the one
that flight sim uses. The Server Address is: 18.104.22.168
CALL SIGN -
Please use the same call sign when joining our TeamSpeak servers
as the call sign you're flying with in Flight Sim. This makes
it easier to locate you during active and busy sessions.
3. CONNECT -
You should now be ready to connect. Click the "Connect" button
to join our TeamSpeak Server.
4. ADDITIONAL INFORMATION - Additional
help setting up your TeamSpeak Client can be found here
2003 - 2010 WestCoastATC.com